Humidity Control Checklist

Use this checklist to systematically assess and address humidity in your apartment. Work through each section in order for the best results.

Step 1: Assess Your Situation

  • Get a hygrometer to measure actual humidity levels
  • Check humidity in different rooms at different times of day
  • Note the morning humidity level in your bedroom
  • Identify which rooms have the highest humidity
  • Look for visible signs: window condensation, musty odors, damp spots
  • Check corners and behind furniture for moisture
  • Inspect closets for dampness or musty smells
  • Check under sinks for leaks or condensation

Step 2: Check Your Ventilation

  • Test bathroom exhaust fan—does it pull air toward the vent?
  • Test kitchen exhaust/range hood—is it effective?
  • Identify which windows can be opened for ventilation
  • Check if cross-ventilation is possible (windows on opposite sides)
  • Note any ventilation limitations (noise, security, single-side windows)
  • Report non-working exhaust fans to your landlord

Step 3: Adjust Daily Habits

Bathroom

  • Run exhaust fan during showers
  • Keep fan running 15-20 minutes after showering
  • Close bathroom door while showering (to contain moisture)
  • Spread towels out to dry after use
  • Squeegee shower walls after bathing
  • Consider shorter, slightly cooler showers

Kitchen

  • Use range hood while cooking
  • Keep lids on pots when boiling
  • Run exhaust for 5-10 minutes after cooking
  • Wipe down wet surfaces after cooking
  • Let dishwasher cool before opening, or vent steam carefully

Bedroom

  • Air out bedding in the morning before making the bed
  • Leave bedroom door slightly open overnight if possible
  • Ventilate the room in the morning
  • Keep closet doors open when practical

General

  • Don't dry clothes indoors without ventilation
  • Open windows when outdoor humidity is lower than indoor
  • Keep furniture slightly away from exterior walls
  • Reduce number of houseplants if humidity is high

Step 4: Add Passive Solutions (If Needed)

  • Place moisture absorbers in closets
  • Add moisture absorber under bathroom sink
  • Use desiccant packs in drawers and storage containers
  • Consider portable fan for air circulation in stagnant areas
  • Check and replace moisture absorbers when full

Step 5: Consider Active Solutions (If Needed)

  • Evaluate whether behavioral changes and passive methods are sufficient
  • If humidity stays above 60%, consider a portable dehumidifier
  • Choose appropriate dehumidifier size for your space
  • Set dehumidifier to maintain 40-50% humidity
  • Position dehumidifier in the most problematic area
  • Establish routine for emptying water reservoir (or set up continuous drain)

Step 6: Address Problem Areas

  • Move items away from damp corners
  • Improve air circulation in closets (declutter, leave doors open)
  • Check for and report any water leaks to landlord
  • Document persistent problems with photos and humidity readings
  • Communicate with landlord about building-level issues

Step 7: Maintain and Monitor

  • Check humidity weekly to track patterns
  • Adjust practices seasonally (summer vs. winter challenges differ)
  • Replace moisture absorbers on schedule
  • Clean exhaust fan covers periodically
  • Clean or replace dehumidifier filters as needed
  • Re-assess if conditions change (new season, new roommate, etc.)

Remember: Consistency matters more than perfection. Following these practices regularly produces better results than occasional intensive efforts.

Quick Reference: Humidity Targets

  • Below 30%: Too dry—may cause discomfort
  • 30-50%: Ideal comfort range
  • 50-60%: Acceptable but watch for issues
  • Above 60%: Too high—take action
  • Above 70%: Problems likely—urgent action needed